manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 209 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 209

104

4

Features of your vehicle

Head Up Display ON/OFF

The HUD display will be activated or
deactivated in user setting mode
whilst engine is ON.

Head Up Display Information

1. Turn By Turn navigation information
2. Road signs (Except Europe)
3. Speedometer
4. Cruise setting speed
5. Smart Cruise Control (SCC) infor-

mation

6. Blind-spot Collision Warning

(BCW) system information

7. Warning lights (Low fuel)
8. AV mode information

OCK047151L

OYG046158L

CAUTION

When replacing the front wind-
screen glass of the vehicles
equipped with the head up dis-
play, replace it with a wind-
screen glass designed for the
head up display operation.
Otherwise, duplicated images
may be displayed on the wind-
screen glass.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments