manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 207 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 207

102

4

Features of your vehicle

AUTO HOLD Indicator
Light (if equipped)

This indicator light illuminates:

• [White] When you activate the auto

hold system by pressing the AUTO
HOLD button.

• [Green] When you stop the vehicle

completely by depressing the
brake pedal with the auto hold sys-
tem activated.

• [Yellow] When there is a malfunc-

tion with the auto hold system.
In this case, have the vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service part-
ner.

❈

For more details, refer to “Auto
Hold” in chapter 5.

LKA(Lane Keeping
Assist) indicator
(if equipped)

The LKA indicator will illuminate when
you turn the lane keeping assist sys-
tem on by pressing the LKA button.
If there is a problem with the system,
the yellow LKA indicator will illumi-
nate.

❈

For more details, refer to “Lane
Keeping Assist (LKA) system” in
chapter 5.

AUTO

HOLD

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments