manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 204 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 204

4 99

Features of your vehicle

Auto stop indicator
(if equipped)

This indicator will illuminate when the
engine enters the Idle Stop mode of
the ISG (Idle Stop and Go) system.
When the automatic starting occurs,
the auto stop indicator on the cluster
will blink for 5 seconds.

❈

For more details, refer to the ISG
(Idle Stop and Go) system in chap-
ter 5.

✽

✽

NOTICE

When the engine automatically starts
by the ISG system, some warning
lights (ABS, ESC, ESC OFF, EPS or
Parking brake warning light) may
turn on for a few seconds. 
This happens because of the low bat-
tery voltage. It does not mean the
system is malfunctioning.

Immobiliser Indicator
Light (With Smart Key) 
(if equipped)

This indicator light illuminates for up
to 30 seconds:

• When the vehicle detects the

smart key in the vehicle properly
whilst the Engine Start/Stop Button
is ACC or ON.
- At this time, you can start the

engine.

- The indicator light goes off after

starting the engine.

This indicator light blinks for a few
seconds:

• When the smart key is not in the

vehicle.
- At this time, you can not start the

engine.

This indicator light illuminates for 2
seconds and goes off:

• When the vehicle can not detect

the smart key which is in the vehi-
cle whilst the Engine Start/Stop
Button is ON.
In this case, have the vehicle inspect-
ed by a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

This indicator light blinks:

• When the battery of the smart key

is weak.
- At this time, you can not start the

engine. However, you can start the
engine if you press the Engine
Start/Stop Button with the smart
key. (For more details, refer to
“Starting the Engine” in chapter 5).

• When there is a malfunction with

the immobiliser system.
In this case, have the vehicle inspect-
ed by a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments