manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 202 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 202

4 97

Exhaust system (DPF)
warning light (Diesel
Engine) (if equipped)

This warning light illuminates:

• When there is a malfunction with

Diesel Particulate Filter (DPF) sys-
tem.

• When this warning light illumi-

nates, it may turn off after driving
the vehicle:
- at more than 60km/h (37 mph), or
- at more than 2nd gear with 1500

~ 2000 engine rpm for a certain
time (for about 25 minutes).

If this warning light blinks in spite of
the procedure (at this time the LCD
warning message will be displayed),
have the DPF system checked by a
professional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.

Features of your vehicle

CAUTION - 

Petrol Engine

with GPF (if equipped)

If you continue to drive with the
GPF warning light blinking for a
long time, the GPF system can
be damaged and fuel consump-
tion can worsen.

CAUTION - 

Diesel Engine

with DPF (if equipped)

If you continue to drive with the
DPF warning light blinking for a
long time, the DPF system can
be damaged and fuel consump-
tion can increse.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments