manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 199 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 199

94

4

Features of your vehicle

Overspeed Warning
Light (if equipped)

This warning light blinks:

• When you drive the vehicle more

than 120 km/h.
- This is to prevent you from driving

your vehicle with overspeed.

- The overspeed warning chime

also sound for approximately 5
seconds.

LED Headlamp Warning
Light (if equipped)

This warning light illuminates:

• Once you set the Engine Start/Stop

Button to the ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with

the LED headlamp.

In this case, have the vehicle inspect-
ed by a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

This warning light blinks:

• When there is a malfunction with a

LED headlamp related part.

In this case, have the vehicle inspect-
ed by a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

CAUTION - 

Fuel Filter
Warning Light

• When the Fuel Filter Warning

Light illuminates,

engine

power (vehicle speed & idle
speed) may decrease.

• If you keep driving with the

warning light on, engine parts
(injector, common rail, high
pressure fuel pump) may be
damaged. If this occurs, have
the vehicle inspected by a pro-
fessional workshop as soon
as possible. Kia recommends
to visit an authorised Kia deal-
er/service partner.

120

km/h

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments