manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 197 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 197

92

4

Features of your vehicle

If the engine oil pressure is low:

1.Drive carefully to the nearest safe

location and stop your vehicle.

2.Turn the engine off and check the

engine oil level (For more details,
refer to “Engine Oil” in chapter 7). If
the level is low, add oil as required.
If the warning light remains on after
adding oil or if oil is not available,
have the vehicle inspected by a
professional workshop as soon as
possible. Kia recommends to visit
an authorised Kia dealer/service
partner.

Low Fuel Level Warning
Light

This warning light illuminates:

When the fuel tank is nearly empty.

If the fuel tank is nearly empty:

Add fuel as soon as possible.

CAUTION - 

Engine Oil

Pressure Warning Light

•

If the engine does not stop
immediately after the Engine
Oil Pressure Warning Light is
illuminated, severe damage
could result.

•

If the warning light stays on
whilst the engine is running, it
indicates that there may be
serious engine damage or
malfunction. In this case,
1. Stop the vehicle as soon as

it is safe to do so.

2. Turn off the engine and

check the oil level. If the oil
level is low, fill the engine
oil to the proper level.

3. Start the engine again. If the

warning light stays on after
the engine is started, turn
the engine off immediately.
In this case, have the vehicle
inspected by a professional
workshop. Kia recommends
to visit an authorised Kia
dealer/service partner.

CAUTION - 

Low Fuel
Level

Driving with the Low Fuel Level
warning light on or with the fuel
level below “0 or E” can cause
the engine to misfire and dam-
age the catalytic converter (if
equipped).

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments