Kia Stinger 2019 Owner'S Manual Download Page 191

Page: 191 / 671

Features of your vehicle

WARNING AND INDICATOR LIGHTS

Warning lights

✽

NOTICE -

Warning lights

Make sure that all warning lights
are OFF after starting the engine. If
any light is still ON, this indicates a
situation that needs attention.

Air bag Warning Light

This warning light illuminates:

• Once you set the Engine Start/Stop

Button to the ON position.
- It illuminates for approximately 6

seconds and then goes off.

• When there is a malfunction with

the SRS.
In this case, have the vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service part-
ner.

Seat Belt Warning Light

This warning light informs the driver
that the seat belt is not fastened.

❈

For more details, refer to the “Seat
Belts” in chapter 3.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Stinger 2019

Reviews:

Kia Stinger 2019, Owner'S Manual, Page: 191 / 671

Search results

Summary of Contents for Stinger 2019

Reviews: