manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 181 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 181

76

4

Features of your vehicle

Other features

• Fuel Economy Auto Reset 

- If this item checked, the average

fuel economy will reset automati-
cally after refuelling or after igni-
tion.

• Fuel Economy Unit 

- Choose the fuel economy unit.

(Km/L, L/100Km)

• Temperature Unit 

- Choose the temperature unit.

(°C,°F)

• Tyre Pressure Unit (if equipped)

- Choose the tyre pressure unit.

(psi, kPa, bar)

• Torque Unit(if equipped)

- Choose the torque unit. (N·m,

lb·ft)

Language

Choose the language 

Reset 

You can reset the menus in the User
Settings Mode. All menus in the User
Settings Mode are initialized, except
language and service interval.

Trip modes (Trip computer)

The trip computer is a microcomput-
er-controlled driver information sys-
tem that displays information related
to driving.

✽

✽

NOTICE

Some driving information stored in
the trip computer (for example
Average Vehicle Speed) resets if the
battery is disconnected.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments