manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 177 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 177

72

4

Features of your vehicle

User Settings Mode

Description

On this mode, you can change set-
ting of the doors, lamps, and so on.

Shift to P to edit settings

This warning message appears if
you try to adjust the User Settings
whilst driving.

For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and mov-
ing the shift lever to P (Park).

Head-Up Display (HUD) (if equipped)

• Head-Up Display : If this item is

checked, Head-Up Display will be
activated.

• Display Height : Adjust the height

of the HUD image on the wind-
screen glass.

• Rotation : Adjust the degree of the

HUD rotation.

• Brightness : Adjust the intensity of

the HUD brightness.

• Contents Select

- Turn by Turn : If this item is

checked, Turn by Turn will be acti-
vated.

- Lane Keeping Assist: If this item

is checked, LKA will be activated.

• Speedometer size :

Small/ Medium/Large

• Speedometer colour :

White/Orange/Green

OCK047140L

WARNING

Do not adjust the User Setting
whilst driving. You may lose
your steering control and cause
severe personal injury or acci-
dents.

OCK047142L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments