manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 170 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 170

4 65

Features of your vehicle

Odometer

The odometer Indicates the total dis-
tance that the vehicle has been driv-
en and should be used to determine
when periodic maintenance should
be performed.
- Odometer range : 0 ~ 1,599,999 km

or 0 ~ 999,999 mi

Outside Temperature

This gauge indicates the current out-
side air temperatures by 1°C (1°F).
- Temperature range : -40°C ~ 60°C 

(-40°F ~ 140°F)

The outside temperature on the dis-
play may not change immediately
like a general thermometer to pre-
vent the driver from being inattentive.
The temperature unit can be
changed by using the “User Settings”
mode of the LCD display.

❈

For more details, refer to “LCD
Display” in this chapter.

OCK047112

■

Type A

■ 

Type B

OCK047111

OYG046119

■

Type A

■ 

Type B

OYG046118

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments