manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 169 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 169

64

4

Features of your vehicle

Fuel Gauge

This gauge indicates the approxi-
mate amount of fuel remaining in the
fuel tank.

✽

✽

NOTICE

• The fuel tank capacity is given in

chapter 8.

• The fuel gauge is supplemented by

a low fuel warning light, which
will illuminate when the fuel tank
is nearly empty.

• On inclines or curves, the fuel

gauge pointer may fluctuate or the
low fuel warning light may come
on earlier than usual due to the
movement of fuel in the tank.

WARNING - 

Fuel Gauge

Running out of fuel can expose
vehicle occupants to danger.
You must stop and obtain addi-
tional fuel as soon as possible
after the warning light comes
on or when the gauge indicator
comes close to the “0 or E
(Empty)” level.

CAUTION

Avoid driving with an extremely
low fuel level. Running out of fuel
could cause the engine to misfire
damaging the catalytic converter.

OCK047106

OCK047106L

■

Type A

■

Type B

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments