manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 166 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 166

4 61

Features of your vehicle

Instrument Cluster Control

Adjusting Instrument Cluster
Illumination (if equipped)

The brightness of the instrument
panel illumination is changed by
pressing the illumination control but-
ton (“+”

or “-”) when Engine

Start/Stop button is ON, or the tail
lights are turned on.

• If you hold the illumination control

button (“+” or “-”), the brightness
will be changed continuously.

• If the brightness reaches to the

maximum or minimum level, an
alarm will sound.

OCK047047R

OCK047138L

WARNING

Never adjust the instrument
cluster whilst driving. This could
result in loss of control and lead
to an accident that may cause
death, serious injury, or property
damage.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments