manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 161 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 161

56

4

Features of your vehicle

Folding the outside rearview mirror

Manual type

To fold the outside rearview mirror,
grasp the housing of the mirror and
then fold it toward the rear of the
vehicle.

Electric type

The outside rearview mirror can be
folded or unfolded by pressing the
switch as below.

Right (1)

: The mirror will unfold.

Left (2)

: The mirror will fold.

Centre (AUTO, 3)

:

The mirror will fold or unfold automat-
ically as follows:

- The mirror will fold or unfold when

the door is locked or unlocked by
the smart key.

- The mirror will fold or unfold when

the door is locked or unlocked by
the button on the outside door
handle.

CAUTION

• The mirrors stop moving when

they reach the maximum
adjusting angles,

but the

motor continues to operate
whilst the switch is pressed.
Do not press the switch longer
than necessary, the motor
may be damaged.

• Do not attempt to adjust the

outside rearview mirror by
hand. Doing so may damage
the parts.

OCK047060R

OCK047044R

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments