manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 159 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 159

54

4

Features of your vehicle

To operate the electric rearview mirror:

• The mirror defaults to the ON posi-

tion whenever the Engine
Start/Stop Button is in the ON posi-
tion.

• Press the ON/OFF button (1) to

turn the automatic dimming func-
tion off. The mirror indicator light
(2) will turn off.
Press the ON/OFF button (1) to
turn the automatic dimming func-
tion on. The mirror indicator light
(2) will illuminate.

❈

(2) : Indicator, (3) : Sensor

Outside rearview mirror

Be sure to adjust the mirror angles
before driving.
Your vehicle is equipped with both
left-hand and right-hand outside
rearview mirrors. The mirrors can be
adjusted remotely with the remote
switch. The mirror heads can be fold-
ed back to prevent damage during an
automatic car wash or when passing
through a narrow street.

CAUTION

When cleaning the mirror, use a
paper towel or similar material
dampened with glass cleaner.
Do not spray glass cleaner
directly on the mirror. It may
cause the liquid cleaner to enter
the mirror housing.

OCK047059L

WARNING - 

Rearview
mirrors

• The outside rearview mirror is

convex. Objects seen in the
mirror are closer than they
appear.

• Use your interior rearview

mirror or direct observation to
determine the actual distance
of following vehicles when
changing lanes.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments