manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 158 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 158

4 53

Features of your vehicle

Inside rearview mirror

Adjust the rearview mirror so that the
centre view through the rear window
is seen. Make this adjustment before
you start driving.

Electrochromic mirror (ECM)

The electric rearview mirror automat-
ically controls the glare from the
headlights of the vehicles behind you
in nighttime or low light driving condi-
tions. The sensor mounted in the mir-
ror senses the light level around the
vehicle, and automatically controls
the headlight glare from the vehicles
behind you.
When the engine is running, the glare
is automatically controlled by the sen-
sor mounted in the rearview mirror.
Whenever the shift lever is shifted
into reverse (R), the mirror will auto-
matically go to the brightest setting in
order to improve the drivers view
behind the vehicle.

MIRRORS

WARNING - 

Rear visibility

Do not place objects in the rear
seat or cargo area which would
interfere with your vision
through the rear window.

WARNING 

Do not adjust the rearview mir-
ror whilst the vehicle is moving.
This could result in loss of con-
trol, and an accident which
could cause death, serious
injury or property damage.

WARNING 

Do not modify the inside mirror
and don’t install a wide mirror. It
could result in injury, during an
accident or deployment of the
air bag.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments