manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 157 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 157

52

4

Features of your vehicle

Horn

To sound the horn, press the area
indicated by the horn symbol on your
steering wheel (see illustration). The
horn will operate only when this area
is pressed. Check the horn regularly
to be sure it operates properly.

OCK047052L

CAUTION

• Do not strike the horn severe-

ly to operate it, or hit it with
your fist. Do not press on the
horn with a sharp-pointed
object.

• When cleaning the steering

wheel, do not use an organic
solvent such as thinner, ben-
zene, alcohole and petrol.
Doing so may damage the
steering wheel.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments