manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 156 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 156

4 51

Features of your vehicle

Electric type

Adjust the steering wheel angle (2)
and position (3) with the switch (1).
Never adjust the position of the
steering wheel whilst driving.

Heated steering wheel 
(if equipped)

When the Engine Start/Stop Button
is in the ON position, pressing the
heated steering wheel button warms
the steering wheel. The indicator on
the button will illuminate.
To turn the heated steering wheel off,
press the button once again. The
indicator on the button will turn off.

✽

✽

NOTICE

The heated steering wheel will turn
off automatically approximately 30
minutes after the heated steering
wheel is turned on. 

CAUTION

Do not install any grip to oper-
ate the steering wheel. This
causes damage to the heated
steering wheel system.

OCK047039R

OCK047038R

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments