manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 155 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 155

50

4

Features of your vehicle

Tilt & telescopic steering 

A tilt and telescopic steering wheel
allows you to adjust the steering
wheel before you drive. You can also
raise it to give your legs more room
when you exit and enter the vehicle.

The steering wheel should be posi-
tioned so that it is comfortable for
you to drive, whilst permitting you to
see the instrument panel warning
lights and gauges.

Manual type

To change the steering wheel angle,
pull down the lock release lever (1),
adjust the steering wheel to the
desired angle (2) and height (3), then
pull up the lock-release lever to lock
the steering wheel in place. Be sure to
adjust the steering wheel to the
desired position before driving.

✽

✽

NOTICE

After adjustment, sometimes the
lock-release lever may not lock the
steering wheel.
It is not a malfunction. This occurs
when two gear teeth meet head on
engage. In this case, adjust the steer-
ing wheel again and then lock the
steering wheel.

WARNING

• Never adjust the angle of the

steering wheel whilst driving.
You may lose steering control
and cause severe personal
injury, death or accidents.

• After adjusting,

push the

steering wheel both up and
down to be certain it is locked
in position.

OCK047037R

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments