manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 153 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 153

48

4

Features of your vehicle

Resetting the sunroof

Whenever the vehicle battery is dis-
connected or discharged, you must
reset your sunroof system as follows:
1.Start the engine.
2.Close the sunshade and sunroof

completely if opened.

3.Release the sunroof control lever.
4.Push the sunroof control lever for-

ward in the direction of close until
the sunroof slightly moves. Then,
release the lever.

5.Push the sunroof control lever for-

ward in the direction of close, until the
sunroof operates as follows again:

Sunshde open 

→ 

Glass slide open

→ 

Glass slide close 

→ 

Sunshade

close 

Then, release the lever.

When this is complete, the sunroof
system has been reset.

✽

✽

NOTICE

If you do not reset the sunroof, it
may not work properly.

CAUTION - 

Sunroof motor 
damage

If you try to open the sunroof
when the temperature is below
freezing or when the sunroof is
covered with snow or ice, the
glass or the motor could be
damaged.

CAUTION

• Periodically remove any dirt

that may accumulate on the
guide rail.

• If you drive with the sunroof

opened right after a car wash
or rain, water may get inside
the vehicle.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments