manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 151 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 151

46

4

Features of your vehicle

When the sunshade is opened

Pull the sunroof control lever back-
ward to the 1st or 2nd detent position,
the sunroof glass will slide all the way
open. To stop the sunroof movement
at any point, push the sunroof control
lever momentarily.

Tilting the sunroof 

When the sunshade is closed

Push the sunroof control lever upward,
the sunshade will slide open then the
sunroof glass will tilt.
To stop the sunroof movement at any
point, push the sunroof control lever
momentarily.

When the sunshade is opened

Push the sunroof control lever
upward, the sunroof glass will tilt.
To stop the sunroof movement at any
point, push the sunroof control lever
momentarily.

OCK047036

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments