manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 146 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 146

4 41

Features of your vehicle

(Continued)

Once refuelling has begun,
contact with the vehicle
should be maintained until the
filling is complete.
Use only approved portable
plastic fuel containers
designed to carry and store
petrol.

• Do not use mobile phones

whilst refuelling. Electric cur-
rent and/or electronic interfer-
ence from mobile phones can
potentially ignite fuel vapours
causing a fire.

• When refuelling, always shut

the engine off. Sparks pro-
duced by electrical compo-
nents related to the engine
can ignite fuel vapours caus-
ing a fire. Once refuelling is
complete, check to make sure
the filler cap and filler door
are securely closed, before
starting the engine.

(Continued)

(Continued)
• DO NOT use matches or a

lighter and DO NOT SMOKE or
leave a lit cigarette in your
vehicle whilst at a gas station
especially during refuelling.
Automotive fuel is highly
flammable and can, when
ignited, result in fire.

• If a fire breaks out during refu-

elling, leave the vicinity of the
vehicle, and immediately con-
tact the manager of the gas
station and then contact the
local fire department. Follow
any safety instructions they
provide.

CAUTION

• Make sure to refuel your vehi-

cle according to the "Fuel
requirements" suggested in
chapter 1.

• If the fuel filler cap requires

replacement, please make sure
that you use parts designed for
replacement in your vehicle. An
incorrect fuel filler cap can
result in a serious malfunction
of the fuel system or emission
control system.

For more

detailed information, Kia rec-
ommends to contact an autho-
rised Kia dealer/service part-
ner.

• Do not spill fuel on the exterior

surfaces of the vehicle. Any
type of fuel spilled on painted
surfaces may damage the paint.

• After refuelling, make sure the

fuel cap is installed securely
to prevent fuel spillage in the
event of an accident.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments