manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 144 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 144

4 39

Features of your vehicle

Opening the fuel filler lid

The fuel filler lid must be opened
from inside the vehicle by pushing
the fuel filler lid button.

✽

✽

NOTICE

If the fuel filler lid does not open
because ice has formed around it,
tap lightly or push on the lid to
break the ice and release the lid. 
Do not pry on the lid. If necessary,
spray around the lid with an
approved de-icer fluid (do not use
radiator anti-freeze) or move the
vehicle to a warm place and allow
the ice to melt.

1. Stop the engine.
2. To open the fuel filler lid, push the

fuel filler lid opener button.

3. Pull open the fuel filler lid (1).
4. To remove the cap, turn the fuel

filler cap (2) counterclockwise (3).

5. Refuel as needed.

FUEL FILLER LID

OCK047031R

OCK047032

OCK047032L

■

Type A

■

Type B

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments