manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 128 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 128

4 23

Features of your vehicle

Opening the tailgate

The power tailgate will open automat-
ically by doing one of the following:
• Press the tailgate unlock button on

the smart key for approximately
one second.

WARNING

Make sure that there are no peo-
ple or objects in the path of the
power tailgate (or smart tail-
gate) prior to use. Serious
injury, damage to the vehicle or
damage to surrounding objects
may result if contact with the
power tailgate (or smart tail-
gate) occurs.

OCK047056L

CAUTION

Do not close or open the power
tailgate manually. This may
cause damage to the power tail-
gate. If it is necessary to close
or open the power tailgate man-
ually when the battery is dis-
charged or disconnected, do
not apply excessive force.

OCK047057L

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments