manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 127 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 127

22

4

Features of your vehicle

Power tailgate (if equipped)

✽

✽

NOTICE

Do not put heavy stuffs on the power
tailgate when you operate the power
tailgate. Additional weight on tail-
gate could cause damages to the sys-
tem.

OCK047017R

OCK047016L

OCK047018L

(1) Power tailgate open/close button 
(2) Power tailgate handle switch 
(3) Power tailgate close button

✽

✽

NOTICE

If the engine start/stop button is ON
position, the power tailgate can
operate when the automatic trans-
mission is in P (Park).

WARNING

Never leave children or animals
unattended in your vehicle.
Children or animals might oper-
ate the power tailgate that could
result in injury to themselves or
others, or damage the vehicle.

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments