manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 103 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 103

Safety features of your vehicle

84

3

The active bonnet system can
reduce a risk of injury to pedestrians
by raising the bonnet in certain acci-
dent situations. The active bonnet
system has the additional deforma-
tion space under the bonnet, which
is made available for the subsequent
head impact.
When the active bonnet system is
activated ;
• The Engine start/stop button is in

the ON position and the  vehicle
speed is between about 25km/h
(15.5 MPH) and 50 km/h (31 MPH).

• The active bonnet system is

designed to work in a frontal colli-
sion depending on the intensity,
speed or angles of impact of the
front collision.

✽

✽

NOTICE - 

Active bonnet 
system repair

• If the active bonnet system has

been activated, do not place the
bonnet back by yourself. Have the
system repaired by a professional
workshop. Kia recommends to visit
an authorised Kia dealer/service
partner.

• If you change or repair the front

bumper, have the system checked
by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

Active bonnet system activa-
tion situation

• If the vehicle falls in the gutter or

from a high place.

ACTIVE BONNET SYSTEM (IF EQUIPPED)

OCK037057

OCK037056

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments