
SPORTAGE
F E A T U R E S & F U N C T I O N S G U I D E
STEERING WHEEL CONTROLS
16
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
OK
Images are
for illustrative
purposes only
and may vary on
actual vehicle.
60
60
60
60
Smart Cruise Control
Cancelled
E
G
(Type B; buttons located on right side of
Steering Wheel)
A
B
D
F
REMINDER:
Above are approximate distances based on 56 mph vehicle speed The
SCC vehicle-to-vehicle distance increments are based on vehicle speed
172ft
130ft
82ft
106ft
C
Smart Cruise Control (SCC) with Stop & Go System
*
†6
The Smart Cruise Control (SCC) with Stop & Go system is designed to maintain a
predetermined distance from vehicles detected ahead by automatically adjusting the driving
speed as needed When traffic is detected, the vehicle will slow down to maintain a set
distance behind traffic without depressing the accelerator or brake pedal
To set/adjust SCC speed:
•
Press the CRUISE button
A
to turn system ON The CRUISE indicator will illuminate
on the instrument cluster
•
Accelerate/decelerate to the desired speed
•
Press (SET-) button
B
down to set speed The SET indicator light will illuminate
The set speed and vehicle-to-vehicle distance will illuminate on the LCD screen
•
Press button
B
up or down to adjust the set speed
To set the vehicle-to-vehicle distance
C
:
Press the SCC button
D
on the steering
wheel The image on the LCD screen
E
will change when scrolling through the settings
To cancel SCC operation:
Press the CANCEL button
F
or press the brake pedal The
LCD screen will display a message that the SCC operation is cancelled
G
To turn SCC system OFF:
Press the CRUISE button
A
The CRUISE indicator on the
instrument cluster will turn OFF
REMINDERS:
•
Cruise Control button must be ON in order to turn SCC ON/OFF
•
The SCC can operate when the vehicle is driving above 6 mph
•
SCC is activated when ignition is turned on Speed will need to be reset when ignition is cycled on
•
The SCC system is turned ON again when the ignition is cycled off, then on again The speed setting
will need to be reset when ignition is cycled
•
SCC is also canceled when the driver’s door is opened, gear shift is changed out of D (Drive), EPB is
activated and various other conditions See Owner’s Manual for other conditions
•
In standard Cruise Control, the driver needs to manually assess the distance from other vehicles as
the system will not automatically apply brakes
•
If the SCC system is left on, it can be activated inadvertently Keep the system off when not in use to
avoid setting a speed that the driver is not aware of
•
When following a vehicle, the system will automatically adjust your cruise speed based on the vehicle
detected in front
To change the Cruise Control mode from SCC to standard Cruise Control, press
and hold button
D
Repeat to switch modes again (The SCC system must not be
activated to change modes)
For the SCC system to operate:
•
When no vehicle is in front, you must be travelling at a minimum speed of 20 mph
•
When following a vehicle, you must be traveling at a minimum speed of 6 mph
When following a vehicle, the system will automatically adjust your cruise speed
based on the vehicle detected ahead If the vehicle detected remains at a standstill
for more than 3 seconds, the system will disable
QUICK TIPS
The SCC system is a supplemental system and is not a substitute for safe driving. It is the
responsibility of the driver to always check the speed and distance to the vehicle ahead.
Smart Cruise Control
(SCC) with Stop & Go
Video
QR CODE
www.youtube.com/KiaFeatureVideos
Summary of Contents for Spotage
Page 1: ......