manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 97 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 97

Knowing your vehicle

88

3

1

2

3

4

5

6

7

8

9

Room light

Front (map light)

The lights are turned ON or OFF by
pressing the corresponding switch.

Center (dome light)

➀

DOOR : The light turns on or off
when a door is opened or closed.
The interior light goes out slowly if
the door is closed.
When a door is unlocked by the
transmitter, the interior light stays
on for 30 seconds as long as the
door is not opened.

➁

ON : The light turns on and stays
on even when the doors are all
closed.

➂

OFF : In the OFF position, the
light stays off at all times, even
when a door is open.

Cargo area lamp (if equipped)

The cargo area lamp comes ON
when the rear hatch or rear hatch
window are opened.

INTERIOR LIGHTS 

1KMA2121

1KMB3087

1KMA2122/7KMA2122

➀

➂

➁

Type A

Type B

➀

➁

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments