manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 88 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 88

3 79

1

2

3

4

5

6

7

8

9

Knowing your vehicle

When repairing or scrapping the
vehicle

• Repairing the steering wheel,

instrument panel, center console
or roofs, or installing a car audio
system around the center console
or painting the front metal sheet
could disable the airbag system.
Have such repairs and mainte-
nance performed by an authorized
Kia dealer.

• Special care must be taken in

scrapping or junking an airbag-
equipped vehicle. Always refer
such activities to a qualified profes-
sional.

Airbag warning label

Airbag warning labels which are now
required by the Canadian Motor
Vehicle Safety Standard (CMVSS)
are attached to alert driver and pas-
sengers of potential risk of airbag
system.

Note that these government warn-
ings focus on the risk to children, Kia
also wants you to be aware of the
risks which adults are exposed to.
Those have been described in previ-
ous pages.

OKM039036N

OKM039039

(if equipped)

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments