manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 86 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 86

3 77

1

2

3

4

5

6

7

8

9

Knowing your vehicle

Installing a child restraint on a
front passenger’s seat is for-
bidden.

Never place a rear-facing child
restraint in the front passenger’s
seat. If the airbag deploys, it would
impact the rear-facing child restraint,
causing serious or fatal injury.
In addition, do not place front-facing
child restraint in the front passen-
ger’s seat either. If the front passen-
ger airbag inflates, it would cause
serious or fatal injuries to the child.

Airbag warning light

The purpose of the airbag warning
light in your instrument panel is to
alert you of a potential problem with
your airbag - Supplemental Restraint
System (SRS).

WARNING

- Child

restraints

• Never put a child restraint in

the front passenger’s seat. If
the front passenger airbag
inflates, it would cause seri-
ous or fatal injuries.

• When children are seated in

the rear outboard seats, be
sure to secure the child
restraint system into a locked
in position.

E1BLA204

W7-147

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments