manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 81 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 81

Knowing your vehicle

72

3

1

2

3

4

5

6

7

8

9

Side airbag

Side airbags (side and curtain
airbags) are designed to inflate
depending on the strength, speed
and angles of impact of a side impact
collision or rollover.

If the vehicle chassis is impacted by
bumps or objects on unimproved
roads or sidewalks, airbags may
deploy. Drive carefully on unim-
proved roads or on surfaces not
designed for vehicle traffic to prevent
unintended airbag deployment.

Airbag non-inflation conditions

• In certain low-speed collisions the

airbags may not deploy. The
airbags are designed not to deploy
in such cases because the risk of
injuries which can be caused by
the airbags exceeds the benefits
they provide in protecting occu-
pants.

OVQ036018N

1KMB2064

1VQA2086

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments