manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 79 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 79

Knowing your vehicle

70

3

1

2

3

4

5

6

7

8

9

Why didn’t my airbag go off in
a collision? 

(Inflation and non-inflation condi-
tions of the airbag)

There are many types of accidents
in which one or more of the
airbags would not be expected to
provide additional protection.
These include rear impacts, sec-
ond or third collisions in multiple
impact accidents, as well as low
speed impacts. Just because your
vehicle is damaged and even if it
is totally unusable, don’t be sur-
prised that the airbags did not
inflate.

Airbag collision sensors

➀ 

SRS control module

➁ 

Front impact sensor

➂ 

Side impact sensor (if equipped)

OKM039065/OKM039062/OKM039061/OKM039060

➀

➁

➂

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments