manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 77 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 77

Knowing your vehicle

68

3

1

2

3

4

5

6

7

8

9

Side airbag (if equipped)

Side airbags are stored in the left
side of the driver’s seat, right side of
the front passenger’s seat.
If airbag inflation conditions are met
(side collision), they will inflate.

Curtain airbag (if equipped)

Curtain airbags are located along
both sides of the roof rails above the
front and rear doors.
They are designed to help protect
the heads of the front seat occupants
and the rear outboard seat occu-
pants in certain side impact colli-
sions.

WARNING

- 

Seat covers,

damage and modifications

• Do not use any accessory

seat covers for a vehicle
equipped with side airbags.
Use of seat covers could inter-
fere with side airbag deploy-
ment.
If seat is damaged, have the
vehicle inspected by an autho-
rized Kia dealer. Inform them
that your vehicle is equipped
with side airbags.

• Do not make modifications or

additions to the seats since
injury may result in due to the
malfunction of the airbag sys-
tem.

1KMA2063

1KMA2057

1KMA2059

1KMA2064

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments