manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 59 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 59

Knowing your vehicle

50

3

1

2

3

4

5

6

7

8

9

3. Pull the shoulder portion of the

safety belt all the way out. When
the shoulder portion of the safety
belt is fully extended, it will shift
the retractor to the “Auto Lock”
(child restraint) mode.

4. Slowly allow the shoulder portion

of the safety belt to retract and lis-
ten for an audible “clicking” or
“ratcheting” sound. This indicates
that the retractor is in the “Auto
Lock” mode. If no distinct sound is
heard, repeat steps 3 and 4.

5. Remove as much slack from the

belt as possible by pushing down
on the child restraint system while
feeding the shoulder belt back into
the retractor.

6. Push and pull on the child restraint

system to confirm that the safety
belt is holding it firmly in place. If it
is not, release the safety belt and
repeat steps 2 through 6.

"Click"

MMSA3029

MMSA3028

MMSA3030

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments