manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 330 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 330

7 21

Maintenance

1

2

3

4

5

6

7

8

9

For mixture percentage, refer to the
following table.

Changing the coolant

Have coolant changed by an autho-
rized KIA dealer according to the
Maintenance Schedule at the begin-
ning of this section.

WARNING - 

Radiator cap

Do not remove the radiator cap
when the engine and radiator
are hot. Scalding hot coolant
and steam may blow out under
pressure causing serious injury.

1KMA5048

CAUTION

Put a thick cloth or fabric
around the radiator cap before
refilling the coolant in order to
prevent the coolant from over-
flowing into engine parts such
as generator.

WARNING

- 

Coolant

• Do not use radiator coolant or

antifreeze in the washer fluid
reservoir.

• Radiator coolant can severely

obscure visibility when
sprayed on the windshield
and may cause loss of vehicle
control or damage to paint
and body trim.

-15°C (5°F)

35

65

-25°C (-13°F)

40

60

-35°C (-31°F)

50

50

-45°C (-49°F)

60

40

Ambient

Temperature

Mixture Percentage (volume)

Coolant

Solution

Water

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments