manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 31 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 31

Knowing your vehicle

22

3

1

2

3

4

5

6

7

8

9

Adjusting the height of seat cush-
ion (for driver’s seat, if equipped)

Type A

To change the height of the seat
cushion, rotate the knob located on
the outside of the seat cushion.
• To adjust the front height of the

seat cushion, rotate the knob (

➀

).

• To adjust the rear height of the seat

cushion, rotate the knob (

➁

, if

equipped).

Type B

To change the height of the seat
cushion, rotate the knob located on
the outside of the seat cushion.

Lumbar support 
(for driver’s seat, if equipped) 

You can adjust the lumbar support by
moving the lever on the side of the
driver’s seatback.
Pivoting the lever toward the front of
the vehicle increases the lumbar
support.
Pivoting the lever toward the rear of
the vehicle decreases the lumbar
support.

8KMA2036

OKM039035

1KMA2036

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments