manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 245 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 245

5 13

Driving tips

1

2

3

4

5

6

7

8

9

To remind you of the danger of the
rollover, the rollover warning label is
adhered to the driver’s sunvisor. If
you close the driver’s sunvisor, you
can see the rollover warning label
which is located at the side of the air
bag warning label.

WARNING

- Rollover  

As with other Sports Utility
Vehicle (SUV), failure to operate
this vehicle correctly may result
in loss of control, an accident or
vehicle rollover.
• Specific design characteris-

tics (higher ground clearance,
narrower track, etc.) give this
vehicle a higher center of
gravity than ordinary cars.

• A SUV is not designed for cor-

nering at the same speeds as
conventional vehicles.

• Avoid sharp turns or abrupt

maneuvers.

• In a rollover crash, an unbelt-

ed person is significantly
more likely to die than a per-
son wearing a safety belt.
Make sure everyone in the
vehicle is properly buckled up.

1KMN5513

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments