manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 236 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 236

Driving tips

4

5

Operating precautions for cat-
alytic converters (if equipped)

Your vehicle is equipped with a cat-
alytic converter emission control
device.
Therefore, the following precautions
must be observed:
• Use only UNLEADED FUEL for

gasoline engine (unleaded).

• Do not operate the vehicle when

there are signs of engine malfunc-
tion, such as misfire or a noticeable
loss of performance.

• Do not misuse or abuse the

engine. Examples of misuse are
coasting with the ignition off and
descending steep grades in gear
with the ignition off.

• Do not operate the engine at high

idle speed for extended periods (5
minutes or more).

• Do not modify or tamper with any

part of the engine or emission con-
trol system. All inspections and
adjustments must be made by an
authorized Kia dealer.

Failure to observe these precautions
could result in damage to the catalyt-
ic converter and to your vehicle.
Additionally, such actions could void
your warranties.

1

2

3

4

5

6

7

8

9

WARNING

- Fire

A hot exhaust system can ignite
flammable items under your
vehicle. Do not park, idle or
drive the vehicle over or near
flammable objects, such as
grass, vegetation, paper, leaves,
etc.

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments