manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 232 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 232

4 85

Driving your vehicle

1

2

3

4

5

6

7

8

9

How to cancel or return defogging
logic of automatic climate control sys-
tem

1. Turn the ignition switch to the “ON”

position.

2. Select the defrost position press-

ing defrost button (

).

3. While holding the air conditioning

button (A/C) pressed, press the air
intake control button (

) at least

5 times within 3 seconds.

The A/C display will blink 3 times at
0.5 second intervals. This indicates
that the defogging logic is canceled
or has returned to the programmed
condition.

If the battery has been discharged or
disconnected, the defog logic is reset
to the original condition.

OKM049156

➀ ➁

➂

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments