manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 225 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 225

Driving your vehicle

78

4

1

2

3

4

5

6

7

8

9

Outside tempmeter 

The current outer temperature is dis-
played in 1°C (2°F) where the tem-
perature range is between -40°C ~
60°C (-40°F~140°F).
Press and hold the OFF and AUTO
buttons simultaneously for about 3~5
seconds to change the display from
Celsius to Fahrenheit. Repeat the
procedure to switch the outside tem-
perature display back to the previous
state.

System operation

Ventilation

1. Set the mode to the 

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Set the mode to the 

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system
on.

• If cool air is desired at face level for

bi-level operation, set the mode to
the position.

• If the windshield fogs up, set the

mode to the

, 

position.

OKM049150

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments