manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 218 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 218

4 71

Driving your vehicle

1

2

3

4

5

6

7

8

9

1. Temperature control knob
2. A/C display
3. Fan speed control knob
4. AUTO (automatic control) button
5. Mode selection button
6. Air conditioning button
7. Front windshield defrost button
8. Rear window defrost button
9. Air intake control button 
10. OFF button

Automatic operation

The automatic climate control sys-
tem is controlled by simply setting
the desired temperature.
The Full Automatic Temperature
Control (FATC) system automatically
controls the heating and cooling sys-
tem as follows;

1. Push the AUTO button. It is indi-

cated by AUTO on the display. The
modes, fan speeds, air intake and
air-conditioning will be controlled
automatically by temperature set-
ting.

AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)

OKM049139/OKM040139

OKM049138/OKM040138

Type A

Type A

Type B

Type B

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments