manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 215 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 215

Driving your vehicle

68

4

1

2

3

4

5

6

7

8

9

System operation

Ventilation

1. Set the mode to the 

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Set the mode to the 

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system (if
equipped) on.

• If cool air is desired at face level for

bi-level operation, set the mode to
the position.

• If the windshield fogs up, set the

mode to the 

, 

position.

Air conditioning (if equipped) 

All Kia Air Conditioning Systems are
filled with environmentally friendly 
R-134a refrigerant which is not dam-
aging to the ozone layer.
1. Start the engine. Push the air con-

ditioning button.

2. Set the mode to the 

position.

3. Set the air intake control to the

outside air or recirculated air posi-
tion.

4. Set the temperature control knob

to the desired position.

5. Set the fan speed control to the

desired speed.

6. Adjust the fan speed control and

temperature control to maintain
maximum comfort.

• If warmer air is desired at floor

level for bi-level operation, set the
mode to the 

position and

adjust the temperature control to
maintain maximum comfort.

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments