manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 212 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 212

4 65

Driving your vehicle

1

2

3

4

5

6

7

8

9

MAX/ A/C position 

When you select the MAX
A/C mode while the fan
speed is on, the following
system settings will be
made automatically;
• the air conditioning sys-

tem will be turned on.

• the recirculated air posi-

tion will be selected.

• the face mode will be

selected.

If you select MAX A/C
mode, you will not be able
to cancel the A/C system
operation, or change the
recirculated air mode posi-
tion.
Set the fan speed control
knob to the desired speed
and rotate the tempera-
ture control knob to the
extreme left position for
maximum cooling.
(outlet port:

,   )

Face position 

Air flow is directed toward
the upper body and face.
Additionally, each outlet
can be controlled to direct
the air discharged from
the outlet.
(outlet port:

,   )

Face - floor position 

Air flow is directed towards
the face and the floor. The
air to the floor is warmer
than the air to the face
(except when the temper-
ature control is set to the
extreme cold position).
(outlet port:

,    ,    ,    )

OFF position 

The climate control sys-
tem is turned off.

Floor position 

Most of the air flow is
directed to the floor, with a
small amount of the air
being directed to the wind-
shield and side window
defroster.
(outlet port:

,    ,    ,    , )

Floor - defrost position 

Most of the air flow is
directed to the floor and
the windshield with a
small amount directed to
the side window
defrosters.
(outlet port:

,    ,    ,    , )

Defrost position 

Most of the air flow is
directed to the windshield
with a small amount of air
directed to the side win-
dow defrosters.
(outlet port:

,    ,    )

B

B

C

E

F

C

A

D

E

F

C

A

D

E

F

E

A

D

E

OFF

B

E

MAX

A/C

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments