manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 210 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 210

4 63

Driving your vehicle

1

2

3

4

5

6

7

8

9

1. Fan speed control knob
2. Mode selection knob
3. Temperature control knob
4. Air conditioning button 

(if equipped)

5. Air intake control button
6. Rear window defroster button 

(if equipped)

Fan speed control knob  

The ignition switch must be in the ON
position for fan operation.
The fan speed control knob allows
you to control the fan speed of the air
flowing from the ventilation system.
To change the fan speed, turn the
knob to the right for higher speed or
left for lower speed.
Setting the mode selection knob to
the “0” position turns off the fan.

Temperature control knob

The temperature control knob allows
you to control the temperature of the
air flowing from the ventilation sys-
tem. To change the air temperature in
the passenger compartment, turn
the knob to the right for warm and
hot air or left for cooler air.

MANUAL CLIMATE CONTROL SYSTEM (IF EQUIPPED)

OKM049136

OKM049134

OKM029130

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments