manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 204 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 204

4 57

Driving your vehicle

1

2

3

4

5

6

7

8

9

✽

✽  

NOTICE

When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
Unnecessary battery and generator
drain could occur if the fog lights
are used excessively.

Daytime running light 
(if equipped)

Daytime Running Lights (DRL) can
make it easier for others to see the
front of your vehicle during the day.
DRL can be helpful in many different
driving conditions, and it is especial-
ly helpful after dawn and before sun-
set.
The DRL system will make your
high-beam headlights turn OFF
when:
1. The head light switch is ON.
2. The parking brake engaged.
3. Engine stops.

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments