manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 195 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 195

Driving your vehicle

48

4

The rear parking assist system
assists the driver during backward
movement of the vehicle by chiming
if any object is sensed within a dis-
tance of 120 cm (47 in.) behind the
vehicle. This system is a supplemen-
tal system and it is not intended to
nor does it replace the need for
extreme care and attention of the dri-
ver. The sensing range and objects
detectable by the back sensors are
limited. Whenever backing-up, pay
as much attention to what is behind
you as you would in a vehicle without
a rear parking assist system.

Operation of the rear parking
assist system

Operating condition

• This system will activate when

backing up with the ignition switch
ON.
If the vehicle is moving at a speed
over 5 km/h (3 mph), the system
may not be activated correctly.

• The sensing distance while the

rear parking assist system is in
operation is approximately 120 cm
(47 in.).

• When more than two objects are

sensed at the same time, the clos-
est one will be recognized first.

Types of warning sound

• When an object is 120 cm to 81 cm

(47 in. to 32 in.) from the rear
bumper: Buzzer beeps intermit-
tently.

• When an object is 80 cm to 41 cm

(31 in. to 16 in.) from the rear
bumper: Buzzer beeps more fre-
quently.

• When an object is within 40 cm (15

in.) of the rear bumper:
Buzzer sounds continuously.

REAR PARKING ASSIST SYSTEM (IF EQUIPPED)

1

2

3

4

5

6

7

8

9

OKM029086

WARNING

The rear parking assist system
is a supplementary function
only. The operation of the rear
parking assist system can be
affected by several factors
(including environmental condi-
tions). It is the responsibility of
the driver to always check the
area behind the vehicle before
and while backing up.

Sensors

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments