manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 194 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 194

4 47

Driving your vehicle

1

2

3

4

5

6

7

8

9

Safety belt warning chime 

If the driver's safety belt is not fas-
tened when the ignition key is turned
ON or if it is unfastened after the key
is ON, the safety belt warning chime
will sound for approximately 6 sec-
onds. At this time, if the safety belt is
fastened, the chime will stop at once.

Parking start warning chime

If you drive over 10 km/h (6.2 mph)
with the parking brake applied, the
parking start warning chime will
sound.

Key reminder warning chime

If the driver’s door is opened while
the ignition key is left in the ignition
switch, the key reminder warning
chime will sound. This is to prevent
you from locking your keys in the
vehicle.

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments