manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 175 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 175

Driving your vehicle

28

4

1

2

3

4

5

6

7

8

9

To turn cruise control off, do
one of the following:

• Push the CRUISE ON-OFF button

(the CRUISE indicator light in the
instrument cluster will go OFF).

• Turn the ignition off.

Both of these actions cancel cruise
control operation. If you want to
resume cruise control operation,
repeat the steps provided in “To Set
Cruise Control Speed” on the previ-
ous page.

To increase cruise control set
speed:

Follow either of these procedures:
• Push up the + / RES switch and hold

it. Your vehicle will accelerate.
Release the switch at the speed you
want.

• Push up the + / RES switch and

release it immediately. The cruising
speed will increase 1.6 km/h (1
mph) by one touch and will be mem-
orized to the reset speed.

To temporarily accelerate with
the cruise control on

If you want to speed up temporarily
when the cruise control is on,
depress the accelerator pedal.
Increased speed will not interfere
with cruise control operation or
change the set speed.
To return to the set speed, take your
foot off the accelerator.

8KMB2189

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments