manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 173 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 173

Driving your vehicle

26

4

1

2

3

4

5

6

7

8

9

The cruise control system allows you
to program the vehicle to maintain a
constant speed without resting your
foot on the accelerator pedal.
With cruise control, you can set and
automatically maintain any speed of
between 40 km/h (24 mph) and 
160 km/h (96 mph).

To set cruise control speed:

1. Push the CRUISE ON-OFF button

on the steering wheel, to turn the
system on. The CRUISE indicator
light in the instrument cluster will
illuminate.

2. Accelerate to the desired speed,

which must be more than 40 km/h
(24 mph) and less than 160 km/h
(96 mph).

CRUISE CONTROL SYSTEM (IF EQUIPPED)

WARNING

- Cruise 

control

Do not use the cruise control
feature under the following con-
ditions:
• Heavy or unsteady traffic
• Slippery or winding roads
• Situations that involve varying

speeds

8KMB2186

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments