manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 144 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 144

3 135

Knowing your vehicle

1

2

3

4

5

6

7

8

9

Satellite radio channels:

SIRIUS Satellite Radio has over 130
channels, including 69 channels of
100% commercial-free music, plus
sports, news, talk and entertainment
available nationwide in your vehicle.
For more information and a complete
list of SIRIUS Satellite Radio chan-
nels, visit sirius.com in the United
States, sirius-canada.ca in Canada, or
call SIRIUS at 1-888-539-7474.

Satellite radio reception fac-
tors:

To receive the satellite signal, your
vehicle has been equipped with a
satellite radio antenna located on the
roof of your vehicle. The vehicle roof
provides the best location for an
unobstructed, open view of the sky, a
requirement of a satellite radio sys-
tem. Like AM/FM, there are several
factors that can affect satellite
radio reception performance:
• Antenna obstructions: For optimal

reception performance, keep the
antenna clear of snow and ice
build-up and keep luggage and
other material as far away from the
antenna as possible.

• Terrain: Hills, mountains, tall build-

ings, bridges, tunnels, freeway
overpasses, parking garages,
dense tree foliage and thunder-
storms can interfere with your
reception.

SIRIUS Satellite Radio service:

SIRIUS Satellite Radio is a subscrip-
tionbased satellite radio service that
broadcasts music, sports, news and
entertainment programming to radio
receivers, which are available for
installation in motor vehicles or facto-
ry installed, as well as for the home,
portable and wireless devices, and
through an Internet connection on
personal computer.
Vehicles that are equipped with a
factory installed SIRIUS Satellite
Radio system include:
• Hardware and an introductory trial

subscription term, which begins on
the date of sale or lease of the
vehicle.

• For a small upgrade fee, access to

SIRIUS music channels, and other
select channels over the Internet
using any computer connected to
the Internet (U.S. customers only).

For information on extended sub-
scription terms, contact SIRIUS at
1-888-539-7474.

✽

✽

NOTICE

Satellite Radio requires SIRIUS

®

compatible receiver and a subscrip-
tion service fee after trial period.
Vehicles without a factory-installed
radio receiver require hardware pur-
chase and installation. Please see your
dealer for further details. All fees and
programming subject to change.
Subscriptions governed by the SIR-
IUS Terms & Conditions available at
www.sirius.com / serviceterms.
Available only in the 48 contiguous
United States and the District of
Columbia. Service available in
Canada;
see www.siriuscanada.ca
Chrysler LLC shall not be responsi-
ble for any such programming
changes.

Satellite Radio Electronic Serial
Number (ESN):

This 12-digit

Satellite Serial Number is needed to
re-activate, modify or track your
satellite radio account. You will need
this number when communicating
with SIRIUS.

SIRIUS SATELLITE RADIO INFORMATION (IF EQUIPPED)

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments