manualshive.com logo in svg

Kia Sportage 2010, Owner'S Manual, Page: 136 / 371

Share
Download
Kia Sportage 2010 Owner'S Manual Download Page 136

3 127

Knowing your vehicle

1

2

3

4

5

6

7

8

9

8. TUNE/ENTER Button

Turn this button clockwise to display
songs after current song.
Also, turn this button counterclock-
wise to display songs before current
song.
To listen to the displayed song, press
the button to skip to the song and
play.

9. REPEAT Selection Button

Repeats current song when the but-
ton is pressed for less than 0.8 sec-
ond.
Repeats the entire DISC when the
button is pressed for 0.8 second or
longer.

10. RANDOM Selection Button

Turns on/off the randomization of the
play list of files in the currently played
DISC.
To cancel the mode, press the key
once again.

11. DISC Selection Button

• [DISC

] Change Button 

Changes disc to the previous disc.

• [DISC

] Change Button

Changes disc to the next disc.

12. SCAN Selection Button

Plays first 10 seconds of each song
in the DISC.
To cancel the mode, press the key
once again.

CAUTION

- Using USB

device

• To use the external USB

device, make sure the device
is not mounted when starting
up the vehicle and mount the
device after starting up.

• If you start the vehicle when

the USB device is mounted, it
may damage the USB device.
(USB is not ESA)

• If the vehicle is started up or

turned off while the external
USB device is connected, the
external USB device may not
work.

• It may not play inauthentic

MP3 or WMA files.
1) It can only play MP3 files

with the compression rate
between 8Kbps~320Kbps.

2) It can only play WMA music

files with the compression
rate between 8Kbps~
320Kbps.

(Continued)

Summary of Contents for Sportage 2010




















































































































































































































































































































































































Reviews:

No comments